Table 5. Mechanical properties of jabon wood impregnated with different treatments

Treatments	Density (kg/m³)¹⁾	CS (kg/cm²)¹⁾	Static banding (kg/cm²)¹⁾
Treatments	Density (kg/m³)¹⁾	CS (kg/cm²)¹⁾	MOE	MOR
Untreated (control)	340^e	254.58^c	50,226.82^d	494.49^d
8% kak + water	450^d	351.50^b	64,514.25^c	565.60^c
8% kak + water + 4% borax	500^b	440.68^a	65,854.07^c	630.41^ab
10% kak + water	480^c	426.03^a	66,073.44^c	586.87^bc
10% kak + water + 4% borax	500^bc	438.67^a	64,967.24^c	630,65^ab
8% kak + WV	490^bc	357.84^b	74,057.32^b	639.61^a
8% kak + WV + 4% borax	540^a	449.79^a	79,241.59^a	663.12^a
10% kak + WV	500^b	431.47^a	73,746.60^b	640.62^a
10% kak + WV + 4% borax	530^a	445.12^a	77,308.31^ab	657.02^a

Average of 5 replications.
Mean values followed by the same letter(s) in the same column are not significantly different at alpha 0.05 according to Duncan’s test.
CS: compression strength parallel to grains, MOE: modulus of elasticity, MOR: modulus of rupture, kak: animal-based resin adhesive, WV: wood vinegar.